Service 01 / Small format

Business & marketing print

The everyday print a business runs on: cards, flyers, brochures, catalogues, stickers, labels and packaging. Printed on sheet stock, then cut, folded, bound or laminated to your specification.

Job ticketNo. 01

Product
Cards, flyers, brochures, catalogues, labels, packaging
Stock
From light text paper to rigid card
Finish
Cut, fold, bind, laminate
Proof
Approved by you before print

01 / Products

Twelve things we put on paper

Filter by category. Each card lists the usual options and what to send with your brief.

StationeryNo. 01

Business cards

The card that changes hands at the end of a meeting. Printed one or both sides on heavy card, trimmed square or cut to a shape.

Size
85 × 55 mm is the standard; other sizes to order
Stock
Heavy card, coated or uncoated
Finish
Matt, gloss or soft-touch lamination; spot UV; foil
Send us
PDF with 3 mm bleed, front and back as separate pages
StationeryNo. 02

Letterheads & compliment slips

Printed on uncoated paper so they take a pen, a stamp and a pass through an office laser or inkjet printer.

Size
A4 letterhead; DL compliment slip
Stock
Uncoated paper, 90–120 gsm
Print
One side; full colour or a single ink
Send us
PDF; add 3 mm bleed if anything touches the edge
StationeryNo. 03

Notepads & presentation folders

Glued notepads on a board back, and folders with a pocket that holds A4 documents and a business card.

Size
A4, A5 or A6 pads; A4 folders
Stock
Pads on uncoated paper; folders on heavy card
Finish
Folders are creased, die-cut and usually laminated
Send us
Folder artwork laid out on the die-line template
MarketingNo. 04

Flyers & leaflets

Single sheets for handing out, posting or leaving on a counter. Flat, or folded once or twice.

Size
A6, A5, DL or A4
Stock
130–170 gsm coated is typical; heavier for a postcard feel
Folds
Half fold, letter (tri) fold, Z fold
Send us
PDF with 3 mm bleed, pages in reading order
MarketingNo. 05

Folded brochures

Multi-panel pieces that open out to tell a longer story: a service list, a product range, a route map, an event programme.

Formats
Six-panel letter or Z fold; eight-panel gate or roll fold
Stock
150–250 gsm; heavier sheets are creased before folding
Watch
Panels that fold inwards must be 2–3 mm narrower
Send us
PDF as flat spreads, fold lines marked outside the trim
MarketingNo. 06

Catalogues & booklets

Multi-page print: product catalogues, lookbooks, manuals, programmes and reports.

Binding
Saddle-stitched (stapled) or perfect bound (glued spine)
Pages
Stitched booklets run in multiples of four, cover included
Stock
Heavier cover, lighter inner pages
Send us
Single pages in order, not printer's spreads
MarketingNo. 07

Postcards & invitations

Thick single cards for mailers, thank-you notes, event invitations and vouchers.

Size
A6, DL, square or custom
Stock
300 gsm and up; uncoated reverse if it will be written on
Finish
Lamination on one or both sides; foil; shaped cut
Send us
PDF with 3 mm bleed, both sides
MarketingNo. 08

Menus & price lists

Print made to be handled all day: flat cards, folded menus and counter price lists.

Formats
Flat A4 or A5, half fold, tri fold
Stock
Heavy card, or lighter paper for frequent reprints
Finish
Lamination makes the surface wipe-clean
Tip
Keep prices on their own text layer for quick updates
Stickers & labelsNo. 09

Stickers

Individually cut stickers or kiss-cut sheets, in whatever shape your cut line describes.

Shapes
Round, square, rectangle, or cut to your outline
Material
Paper for indoor use; vinyl where water or weather is involved
Surface
Gloss, matt or clear. Clear film needs a white layer under colours that must stay opaque.
Send us
PDF with the cut line on its own layer, 2 mm bleed past it
Stickers & labelsNo. 10

Product labels on rolls

Labels for jars, bottles, boxes and bags, supplied on rolls for hand or machine application.

Material
Paper, polypropylene or clear film
Adhesive
Permanent or removable. Say if the pack is chilled, frozen or oily.
On the roll
For machine application, tell us core size and wind direction
Send us
PDF at final size, cut line on its own layer
PackagingNo. 11

Folding cartons & product boxes

Printed carton board, die-cut, creased and glued into boxes that ship flat and fold up around the product.

Starts from
A die-line: the flat cutting and creasing template
Stock
Carton board, thickness chosen for the product's weight
Finish
Lamination, spot UV, foil, embossing
Send us
Product dimensions and weight, or your existing die-line
PackagingNo. 12

Sleeves, wraps & swing tags

The lighter way to brand a plain pack: belly bands, box sleeves, header cards and tags on a string.

Formats
Sleeves and bands made to your pack's measurements
Stock
250–350 gsm card, or kraft board for a natural look
Finish
Drilled holes, creases, shaped cuts
Send us
Exact pack dimensions: width, depth and height

Each card lists the usual choices for that product. What is available for your job, in your quantity, is confirmed in the quote.

02 / Paper & finishing

Choosing stock and finish

Paper weight and surface decide how a piece feels in the hand. Finishing decides how it looks and how long it lasts. Tell us what the print has to do and we will suggest a combination.

Paper weights and what they are typically used for
WeightFeels likeTypical use
80–120 gsmWriting paperLetterheads, notepads, inner pages
130–170 gsmSturdy sheet that folds cleanlyFlyers, brochures, posters
200–250 gsmLight cardBrochure covers, menus, postcards
300–400 gsmRigid cardBusiness cards, swing tags, folders

Coated or uncoated? Coated papers (silk or gloss) hold ink on the surface, so images are sharper and colour is stronger. Uncoated papers absorb it: colour is softer, the feel is natural and the sheet is easy to write on.

Lamination
A thin film bonded to the sheet. Matt cuts glare, gloss lifts colour, soft-touch feels velvety. All three protect against scuffing and cracking on folds.
Spot UV
A clear high-gloss varnish applied only where the artwork says, over a logo or a photo, usually on top of matt lamination for contrast.
Foil
Metallic or coloured foil pressed onto the sheet with heat. Supply the foil area as a separate solid layer.
Die-cutting
A custom-shaped cut: rounded outlines, windows, pockets and tabs.
Creasing & folding
Heavier stocks are creased before folding so the fold stays clean and the ink does not crack.
Binding
Saddle stitching staples through the spine fold. Perfect binding glues pages into a square spine and needs enough pages to form one. Wire binding lets a book lie flat.

03 / Artwork guide

Setting up files for press

A file that follows these rules can go straight to proof. One that does not comes back to you with a list of fixes.

Bleed, trim line and safe area A printed sheet whose background colour extends three millimetres beyond the trim line on every edge, with text kept inside a dashed safe area. 123
  1. Bleed. Background colour and images run 3 mm past the trim on every edge.
  2. Trim line. Where the sheet is cut: the finished size.
  3. Safe area. Text and logos stay at least 3 mm inside the trim.
Crop marks sit outside the bleed and show where to cut.
  • Build the document at its finished size, then add 3 mm of bleed on every edge.
  • Keep text, logos and page numbers at least 3 mm inside the trim, and 5 mm or more on bound booklets.
  • Work in CMYK. Convert RGB images before you export, so you see any colour shift on screen rather than on paper.
  • Place images at 300 ppi at the size they print. Enlarging a small image lowers its real resolution.
  • Set small black text as 100% K only, not a four-colour mix, so it stays sharp.
  • Large solid blacks print deeper as a rich black: K with a little C, M and Y underneath. Ask which mix suits your stock.
  • Embed fonts or convert them to outlines.
  • Keep cut lines, foil and spot-UV areas on separate, clearly named layers.
  • Export a PDF (PDF/X-1a or PDF/X-4) with crop marks and bleed included. One file per product.

04 / Questions

Asked before most print jobs

Something not covered here? Put the question in your brief and it gets answered with the quote.

Ask about your job
Can you print from a Word or Canva file?

Export it as a PDF first. In Canva, choose the print PDF option with crop marks and bleed switched on. Word can produce a PDF for simple jobs, but it cannot carry bleed properly, so anything that touches the page edge will end up with a white margin. Tell us which program the file comes from and we will advise on the options.

Why do printed colours look different from my screen?

A screen mixes red, green and blue light; a press mixes cyan, magenta, yellow and black ink on paper. Some bright screen colours, especially vivid blues, greens and oranges, sit outside what ink can reproduce. Paper matters too: the same ink looks stronger on coated stock than on uncoated. Working in CMYK from the start and checking the proof are the two best safeguards.

What is bleed, and do I really need it?

Bleed is artwork that extends past the edge of the finished piece. Sheets are cut in stacks and the blade can drift by a fraction of a millimetre. Without bleed, that drift shows as a thin white sliver along the edge. If any colour or image touches the edge of your design, you need 3 mm of bleed.

How many pages can a stitched booklet have?

A saddle-stitched booklet is made of folded sheets, and each sheet gives four pages, so the total, cover included, must be a multiple of four: 8, 12, 16 and so on. Past a certain thickness a stitched booklet will not lie closed, and perfect binding becomes the better choice.

What if my artwork is not print-ready?

You are told exactly what is wrong (missing bleed, low-resolution images, RGB colour, fonts not embedded) so that you or your designer can fix it. If you cannot fix it yourself, say so when you send the brief and we will tell you what can be done.

How long does a print job take?

It depends on the product, the quantity and the finishing. A laminated, foiled, die-cut job has more steps than a flat flyer. Put your deadline in the brief and the quote will state the turnaround we can offer for that job.

Quotes by email

Ready to put it on paper?

Send the product, finished size, quantity, stock and deadline. We reply by email with a quote.