Service 03 / Merch

Custom merchandise

T-shirts, tote bags, mugs and promotional items carrying your logo or design. The decoration method (screen print, DTF transfer or embroidery) is matched to the artwork, the material and the number of pieces.

Job ticketNo. 03

Item
Garments, tote bags, mugs, promotional items
Method
Screen print, DTF transfer, embroidery
Placement
Chest, back, sleeve, wrap
Proof
Mock-up approved before production

01 / Products

Things people keep

A flyer is read once. A good t-shirt, bag or mug stays in use, so the material and the print method matter as much as the design.

WearableNo. 01

T-shirts & garments

T-shirts, polos, hoodies, sweatshirts and workwear with your logo or design, for staff, events, clubs and teams.

Fabric
Cotton, polyester or a blend. The fabric decides which methods work.
Positions
Left chest, centre chest, full back, sleeve, nape
Methods
Screen print, DTF transfer, embroidery
Tell us
Garment type and colour, and a quantity for each size
CarriedNo. 02

Tote bags

Cotton and canvas bags. A flat fabric panel is one of the easiest surfaces to print well.

Fabric
Light cotton for giveaways; heavier canvas for retail
Print area
One side or both; kept clear of seams and handles
Methods
Screen print for bold artwork; DTF for full colour
Tell us
Bag colour, handle length, one side or two
DeskNo. 03

Mugs

Ceramic mugs printed in full colour around the body.

Method
Sublimation: heat transfers the design into the mug's coating, so it is part of the surface rather than a sticker
Print area
A wrap around the body, or separate left and right panels
Watch
Leave a gap on either side of the handle
Tell us
Mug style, and whether the inside or handle is coloured
GiveawayNo. 04

Promotional items

Pens, notebooks, lanyards, badges, keyrings and bottles: everyday objects carrying a small, clear logo.

Print area
Set by the item, and often only a few centimetres wide
Methods
Depends on the item and what it is made of
Artwork
A simplified one-colour logo usually reads best
Tell us
The item, the quantity and the number of print colours

02 / Decoration methods

Ink, film or thread?

Each method has a job it does best. The artwork, the material and the quantity usually make the decision for you.

Method AInk

Screen print

Ink is pushed through a fine mesh stencil straight onto the fabric: one screen, and one pass, for each colour.

Best for
Bold artwork in a few solid colours; larger runs
Feel
Ink bonded to the fabric; durable and flexible
Limits
Each colour adds a screen and set-up; photos need halftones
Artwork
Vector file with colours separated; Pantone references if you have them
Method BFilm

DTF transfer

Direct to film. The design is printed in full colour over a white ink base, coated with adhesive and heat-pressed onto the item.

Best for
Full-colour or photographic artwork; short and mixed runs; names and numbers
Feel
A thin, smooth layer on the surface; large solid areas feel heavier
Works on
Cotton, polyester and blends, light or dark
Artwork
Vector, or PNG at 300 ppi with a transparent background
Method CThread

Embroidery

The logo is digitised into a stitch file and sewn into the garment with thread.

Best for
Logos on polos, caps, fleeces, jackets and workwear
Feel
Raised, textured and hard-wearing
Limits
No gradients; tiny text and fine lines fill in; big filled areas turn stiff
Artwork
Vector logo; thread is matched to the nearest shade
Method DDye

Sublimation

Heat turns dye into gas, which bonds into polyester or into the polymer coating on items such as mugs.

Best for
Mugs and other coated items; white or light polyester
Feel
Nothing to feel: the colour is in the surface
Limits
Needs polyester or a coating; no white ink, so not for dark or cotton items
Artwork
High-resolution image at the printed size

Quick chooser

Find the line that sounds like your job. It is a starting point: send the artwork and quantity and the quote will recommend a method.

Which decoration method to start with for common jobs
Your jobStart with
One or two colours on many piecesScreen print
Full-colour or photographic artworkDTF transfer
A different name or number on each pieceDTF transfer
A logo on polos, caps or jacketsEmbroidery
A full-colour wrap on a mugSublimation
A small logo on pens or keyringsDepends on the item. Ask.

03 / Artwork & placement

Where it goes and what to send

Say where on the item the design sits and how wide it should be. The mock-up shows the exact size and position before anything is produced.

Print positions on a t-shirt A front view showing left chest, centre chest and sleeve positions, and a back view showing nape and full back positions. 123 FRONT 45 BACK
  1. Left chest. A small logo, typically 8–10 cm wide.
  2. Centre chest. The main design, typically up to about 30 cm wide.
  3. Sleeve. A small mark, typically up to about 8 cm wide.
  4. Nape. A small logo just below the back collar.
  5. Full back. The largest area, typically 30–35 cm wide.
Typical sizes on adult garments. Smaller sizes and children's garments take smaller prints.
  • Send logos as vector artwork (AI, EPS, SVG or PDF). It scales cleanly and separates into colours.
  • For photographic designs, send a PNG at 300 ppi at the printed size with a transparent background, not a white box behind the design.
  • Convert text to outlines so fonts cannot be substituted.
  • Tell us the colour of the item. Artwork that works on white may need a white base layer or adjusted colours on dark fabric.
  • Give Pantone references where brand colour matters. Inks and threads are matched as closely as the method allows.
  • Keep lines and gaps bold. For embroidery, keep lettering at least 5 mm tall; for print, avoid hairlines.
  • List sizes with a quantity for each (for example S × 4, M × 10, L × 8) and say whether every piece carries the same design.

04 / Questions

Asked before most merch orders

Send the artwork, the item and the quantity, and most of these answer themselves in the quote.

Ask about your job
Which method is right for my design?

Count the colours and the pieces. A few solid colours on many pieces points to screen print. Full colour, fine detail or a short run points to DTF. A logo that should look premium on a polo or jacket points to embroidery. Send the artwork and quantity and the quote will recommend one.

Can each piece carry a different name or number?

DTF suits this, because every transfer is printed digitally and there is no screen to remake for each name. Send the list as a spreadsheet, spelled exactly as it should print, with the size next to each name.

Will the colour match my brand exactly?

Close, not identical. Fabric colour and texture, ink type and the available thread range all affect the result. Screen-print inks can be mixed to a Pantone reference, DTF is built from process colours, and thread is matched to the nearest shade. The mock-up and proof stage is where you check it.

Can I supply my own garments or items?

Ask first. Fabric content, coatings and seams all affect how a print bonds, so we need to know exactly what the item is before agreeing to decorate it. Send the product name, the composition from the care label and a photo.

Can I see a sample before the full run?

A digital mock-up is part of the process for every job. If you need a physical sample before committing to the full quantity, say so in your brief so it can be included in the quote and the schedule.

How should printed garments be washed?

General guidance for printed and transferred garments: wash inside out on a cool cycle, avoid bleach and tumble drying, and do not iron directly over the print. The garment's own care label comes first.

Quotes by email

Put your mark on it.

Item, colour, sizes with quantities, artwork and deadline. We reply by email with a quote and a recommended method.